Home & New Products

About Us

Products

Seminars

DCC101

DCC201

DCC301

DCC302

 

Contact Us & How to Order

SL-DC-5-SPS-Set: Any Gauge Precision Train Power, SL 5A Amp Digital Precision Voltage/Amperage Throttle + 24V 6A Switching Power Supply w AC cord

Including

• SL 5502405 5A Amp Digital High Efficiency Precision Voltage/Amperage Throttle
• SL 5122406 Regulated SW Power Supply 24 VDC at 6 Amp with DC output cable for easy plug and play with the throttle
• AC 5 foot grounded power cord

Complete Digital Analog Train Control System

New - Includes all items above

(Loco, track and track power clips not included)

Direct From the Manufacturer - Made in the USA

Please turn ON the closed captions "CC" in the lower right corner of the video box above to see narration... Thanks for watching!
(Loco, track and track power clips shown above not included, the throttle is the LAB model that has both rear track power outputs and front mounted power outputs that are not controlled by the 3 way switch, the RED is always positive and the BLACK always negative not affected by the position of the switch. The front outputs are useful for cleaning locos where you place the rear track output into OFF on the 3 way switch and plug the test leads that come with the LAB version to run your loco on its side or on a rolling test track like in the view above)

Shourt Line Direct Price: $249.95 NEW

For international shipping and other payment options contact us by: email info@ShourtLine.com or call 310-622-4431

Features: Get precision control of your analog trains with this ready to run set

For running model trains of any Gauge, the maximum output voltage and amperage as well as wattage can be pre-set in memory and the the throttle is digitally scaled for precise voltage train control. The full color display makes reading voltage, amperage and wattage easy. The Multi-turn scalable pot provides a ball bearing mounted offset control knob for precision speed control and easy momentum control.

Set Features:

• Operating Page Display
  • Readout at the set points for output voltage and current is always showing at the top of the display
  • DMM Large color readouts of the current output; Voltage (green), Amperage (yellow) and Wattage (red)
  • Readout of the Input Voltage is always showing at the bottom of the display
  • Status Icons on the Right side of the display show:
    • Icon for Controls Locked or Unlocked (lock icon = locked, unlocked icon = open)
    • Icon for Output OK (check mark icon = OK)
    • CV or CC Icon (CV icon = constant voltage is limiting output, CC icon = constant current is limiting output)
    • M# Icon (displays current memory # active)
    • Power Icon (shows green = output ON, red = output OFF)
• Set Page Display
  • Displays all 10 memory settings for easy changing and saving of your choice of Voltage and Current Set points for each memory.
  • One of the 10 memory settings can be set to be pre-set on power up and come up with the power ON or OFF as you choose.
    • Perfect for displays for unattended operation where the AC power is switch on and off via timer, user push button or motion detector.
    • A special version of the Throttle is available to provide slow acceleration and deceleration on power up from external push button or motion sensor.
  • Each of the 10 Memory locations provides a user set Auto Protection Shut Off when Voltage, Current or Wattage exceeds the limits you set.
  • Each of the 10 Memory locations also provides setting color screen brightness.
  • All Memory is nonvolatile so you do not loose your setting when power is off.
• ON/OFF button to turn output ON or OFF
• 3 Control buttons:
  • V/↑ Button for Setting Voltage or moving Page UP or recalling M1 Data
  • SET Button to set Data or Load data into current Data Memory or Store data into current Data Memory
  • A/↓ Button for Setting Amperage or moving Page Down or recalling M2 Data into current Data Memory
• Rotary Digital Pot and Blue Push Button at the center of the pot
  • Adjust Set Point for Voltage, Current or Wattage
  • Adjust the Protection voltage, current and wattage limits for auto shut down
  • Adjust value of Data
  • Scale The Multi-Turn Pot
  • Lock all buttons and unlock all buttons when held down for > 2 seconds
• 10 User Memory for storing and recalling data values
  • Each of the 10 memory location stores:
    • Set Point for Voltage, Current or Wattage
    • Over Voltage, Current & Wattage Trip Points for Protection
    • Brightness for color LCD
    • Load Set Points on Power UP
    • Output ON on Power UP
• Nonvolatile Memory
• Electronic Short Circuit, Over Current, Over Voltage and Over Wattage Protection
• High Efficiency - no fan needed
• Easy Setup
• Easy Operation
• Easy user preference setting of memory set points and over voltage, current and wattage protection
• Free Shourt Line Digital analog tutorial for setup, operation
• Designed and manufactured by ShourtLine.com

SL 5502405 5A Amp Digital High Efficiency Precision Voltage/Amperage Throttle

The Multi-Turn Digital Pot provides precision train operation

Highlights:

• Up to 5 Amps track current at any maximum track voltage for any Scale Railroad
• Run Trains of ANY Gauge with user selection of maximum voltage, current & wattage in each of 10 memory settings
• Memory #1 preset for G scale train operation
• Automatic short circuit protection
• Push button electronic ON/OFF of output power
• 3 Position Track Switch for Direction (Forward & Reverse) and total track isolation (OFF)
• Special High Temp ABS housing designed for maximum convection cooling
• 5 Way Gold Plated terminal binding posts with banana sockets on the back for connecting bare track wires, dual banana plug or spade lugs
• 2.1mm Power Input Jack for fast input power connection of the 24V 6.5A switching power supply.
• Digital Pot with user selected 1, 6 or 60 turn rotary ball bearing knob on an offset shaft for fast or slow loco acceleration-braking.
• 10 user Memory settings for voltage and amperage
• Nonvolatile memory for storing all 10 sets of user preferences when power is off

Specifications:

• Input voltage range 6-52VDC (regulated voltage)
• Output voltage range: 0-50VDC
• Output power range: 0-255W (over 125 watts requires aux fan sold separately)
• Output voltage resolution: 0.01V
• Output current resolution: 0.001A
• Output Voltage accuracy 1% (1 digit)
• Output Current accuracy 1% (2 digits)
• 10 user memory
• Protection trigger point memory for voltage, current & wattage (user set)
• Nonvolatile Memory
• Case made from high temp ABS
• Input power plug rated 5 amps at 24 volts DC
• Fwd/Off/Rev switch rated at 16 amps switching current

Shourt Line 5122406 Enclosed SL 6 Amp 24V Power Supply

Easy to use enclosed full feature regulated switching power supply with regulated pure DC power a superior power source for SL 5 amp Digital Pot Throttles

Features:

• High efficiency
  
• High reliability
  
• Silent Operation
• Protections:
  • Over-voltage
  • Over-current
  • Over-power
  • Short-circuit
    
• VAC auto input 100 - 230VAC 50/60Hz
  
• 100% full load burn-in test
  
• Cooling convection
  
• LED Power on indication
  
• AC Power IEC socket output on Power Supply
• IEC plug molded connector to AC molded 2 prong plug with ~5 foot cable

Photos:

Louvers on each side provide convection cooling to eliminate the need for a fan.

Red and black 5 way banana binding posts provide easy wiring to the track and a 2.1 mm metal socket provides easy access for 5 amps of power.

The input voltage must be 1.1 times greater than the maximum desired output voltage. Up to 52 volts DC may be used on the input, however the power supply provided with the kit provides 24.6VDC at 6.5Amps for G Scale or smaller gauge railroads. The minimum input voltage required is 6VDC. Only fully regulated voltage may be used on the input and polarity must be observed.

How to hookup and use the SL-DC-5-SPS-Kit:

Get precision control of your analog trains with this ready to run set

1) Plug the power supply output cable to the throttle's input jack

2) Connect track to the throttle's output 5 way binding posts.

(Piko quick connect power track clips show below are optional) The binding posts work with up to 12AWG size cable. Choose cable size depending on your cable length;: use 18AWG cable for up to 10 feet, use 16 AWG for 10 to 30 feet and 14AWG cable up to 100 feet and over 100 feet use 12AWG cable (all available at our store) The larger the cable the power the power loss.

3) Connect AC Power: The SL Digital Throttle comes preset for running G Scale Trains using memory setting #1. See instructions or tutorial for setting up other memory locations for different Gauge Trains or your choice of maximum voltage, current or wattage allowed.

4) Push the Power ON/OFF button to connect the output power and the Forward button to set the direction and you are ready to run.

Notice the top line of the display shows Set: 0.00 5.10 for zero volts and 5.1 amps maximum when memory #1 setting is used for G scale trains. As the voltage on the track is adjusted you will see the voltage on the top line change as well as the Green output voltage.

5) Rotate the speed knob clockwise for faster speeds, counter clockwise for slower speeds and stop.

To change the momentum and accuracy of track voltage setting push the blue button at the center of the rotary control to cycle through your choice of 1V, 1/10V and 1/100V steps. (To recall memory setting #1 for G Scale trains just push and hold the the top left V/↑ button for 2 seconds.)

Run any Gauge Analog Layout! (loco, track and track power clips not included)

Limited quantity available - Order now while stock is available - Direct from Manufacturer - By ShourtLine.com

For questions email info@ShourtLine.com or call 310-622-4431

Thanks for looking - Shourt Line by Soft Works Ltd.

copyright 2018 ShourtLine.com - Soft Works Ltd. all rights reserved