SL-DC-5-SPS-Set-B: Any Gauge Precision Train Power, SL 5A Amp Digital Precision Voltage/Amperage Black Label Throttle w test leads + 24V 6A Switching Power Supply w AC cord
Including
SL 5512405 5A Amp Digital High Efficiency Precision Voltage/Amperage Black Label Throttle
Test Leads with alligator clips
SL 5122406 Regulated SW Power Supply 24 VDC at 6 Amp with DC output cable for easy plug and play with the throttle
AC 5 foot grounded power cord
Complete Digital Analog Train Control System
Bench top regulated power supply - adjustable voltage and current regulation with user selected over voltage, current and wattage set points and 10 nonvolatile user memories
New - Includes all items above (note: optional micro test leads shown, alligator test leads shipped unless micro test leads are requested - your choice of test leads)
(Loco, track and track power clips not included)
Direct From Manufacturer - Made in the USA
Please turn ON the closed captions "CC" in the lower right corner of the video box above to see narration... Thanks for watching! (Loco, track and track power clips shown above not included, the throttle is the LAB model that has both rear track power outputs and front mounted power outputs that are not controlled by the 3 way switch, the RED is always positive and the BLACK always negative not affected by the position of the switch. The front outputs are useful for cleaning locos where you place the rear track output into OFF on the 3 way switch and plug the test leads that come with the LAB version to run your loco on its side or on a rolling test track like in the view above)
SL Direct Discount Price: $254.99 NEW
For international shipping and other payment options contact us by: email info@ShourtLine.com or call 310-622-4431
Features: Get precision control of your analog trains with this ready to run set
For running model trains of any Gauge, the maximum output voltage and amperage as well as wattage can be pre-set in memory and the the throttle is digitally scaled for precise voltage train control. The full color display makes reading voltage, amperage and wattage easy. The Multi-turn scalable pot provides a ball bearing mounted offset control knob for precision speed control and easy momentum control.
The set doubles as a full featured lab supply with independent voltage and current set points, user selected voltage, current and wattage protection set points. A full color display shows a digital display of output Voltage, Current and Wattage as well as actual input voltage (bottom line on the display) and voltage/current set user set points (top line of display).
A test lead set is included for; cleaning your loco wheels, trouble shooting locos, motors, lights, LEDs. The current control provides a convenient way to charge all types of batteries and safely testing current controlled devices like LEDs..
Set Features:
Operating Page Display
Readout at the set points for output voltage and current is always showing at the top of the display
DMM Large color readouts of the current output; Voltage (green), Amperage (yellow) and Wattage (red)
Readout of the Input Voltage is always showing at the bottom of the display
Status Icons on the Right side of the display show:
Icon for Controls Locked or Unlocked (lock icon = locked, unlocked icon = open)
Icon for Output OK (check mark icon = OK)
CV or CC Icon (CV icon = constant voltage is limiting output, CC icon = constant current is limiting output)
M# Icon (displays current memory # active)
Power Icon (shows green = output ON, red = output OFF)
Set Page Display
Displays all 10 memory settings for easy changing and saving of your choice of Voltage and Current Set points.
One of the 10 memory settings can be automatically recalled on power up and come up with the power ON or OFF as you choose.
Perfect for displays for unattended operation where the AC power is switch on and off via timer, user push button or motion detector.
A special version of the Throttle is available to provide slow acceleration and deceleration on power up from external push button or motion sensor.
Each of the 10 Memory locations provides a user set Auto Protection Shut Off when Voltage, Current or Wattage exceeds the limits you set.
Each of the 10 Memory locations also provides setting color screen brightness.
All Memory is nonvolatile so you do not loose your setting when power is off.
ON/OFF button to turn output ON or OFF
3 Control buttons:
V/↑ Button for Setting Voltage or moving Page UP or recalling M1 Data
SET Button to set Data or Load data into current Data Memory or Store data into current Data Memory
A/↓ Button for Setting Amperage or moving Page Down or recalling M2 Data into current Data Memory
Rotary Digital Pot and Blue Push Button at the center of the pot
Adjust Set Point for Voltage, Current or Wattage
Adjust the Protection voltage, current and wattage limits for auto shut down
Adjust value of Data
Scale The Multi-Turn Pot
Lock all buttons and unlock all buttons when held down for > 2 seconds
10 User Memory for storing and recalling data values
Each of the 10 memory location stores:
Set Point for Voltage, Current or Wattage
Over Voltage, Current & Wattage Trip Points for Protection
Brightness for color LCD
Load Set Points on Power UP
Output ON on Power UP
Test lead set with alligator jaws for bench use and testing
Nonvolatile Memory
Electronic Short Circuit, Over Current, Over Voltage and Over Wattage Protection
High Efficiency - no fan needed
Easy Setup
Easy Operation
Easy user preference setting of memory set points and over voltage, current and wattage protection
Free Shourt Line Digital analog tutorial for setup, operation
Designed and manufactured by ShourtLine.com
SL 5512405 5A Amp Digital High Efficiency Precision Voltage/Amperage Black Label Throttle
The Multi-Turn Digital Pot provides precision train operation
Highlights:
Up to 5 Amps track current at any maximum track voltage for any Scale Railroad
Run Trains of ANY Gauge with user selection of maximum voltage, current & wattage in each of 10 memory settings
Memory #1 preset for G scale train operation
Automatic short circuit protection
Push button electronic ON/OFF of output power
3 Position Track Switch for Direction (Forward & Reverse) and total track isolation (OFF)
Special High Temp ABS housing designed for maximum convection cooling
5 Way Gold Plated terminal binding posts with banana sockets on the back for connecting bare track wires, dual banana plug or spade lugs
2.1mm Power Input Jack for fast input power connection of the 24V 6.5A switching power supply.
Digital Pot with user selected 1, 6 or 60 turn rotary ball bearing knob on an offset shaft for fast or slow loco acceleration-braking.
10 user Memory settings for voltage and amperage
Nonvolatile memory for storing all 10 sets of user preferences when power is off
Specifications:
Input voltage range 6-52VDC (regulated voltage)
Output voltage range: 0-50VDC
Output power range: 0-255W (over 125 watts output requires more than 25VDC input and an auxiliary fan both are sold separately)
Output voltage resolution: 0.01V
Output current resolution: 0.001A
Output Voltage accuracy 1% (1 digit)
Output Current accuracy 1% (2 digits)
10 user memory
Protection trigger point memory for voltage, current & wattage (user set)
Nonvolatile Memory
Case made from high temp ABS
Input power plug rated 5 amps at 24 volts DC
Fwd/Off/Rev switch rated at 16 amps switching current
Shourt Line 5122406 Enclosed SL 6 Amp 24V Power Supply
Easy to use enclosed full feature regulated switching power supply with regulated pure DC power a superior power source for SL 5 amp Digital Pot Throttles
Features:
High efficiency
High reliability
Silent Operation
Protections:
Over-voltage
Over-current
Over-power
Short-circuit
VAC auto input 100 - 230VAC 50/60Hz
100% full load burn-in test
Cooling convection
LED Power on indication
AC Power IEC socket output on Power Supply
IEC plug molded connector to AC molded 2 prong plug with ~5 foot cable
Photos:
Louvers on each side provide convection cooling to eliminate the need for a fan.
Red and black 5 way banana binding posts provide easy wiring to the track and a 2.1 mm metal socket provides easy access for 5 amps of power.
The input voltage must be 1.1 times greater than the maximum desired output voltage. Up to 52 volts DC may be used on the input, however the power supply provided with the kit provides 24.6VDC at 6.5Amps for G Scale or smaller gauge railroads. The minimum input voltage required is 6VDC. Only fully regulated voltage may be used on the input and polarity must be observed.
How to hookup and use the SL-DC-5-SPS-Kit:
Get precision control of your analog trains with this ready to run set
1) Plug the power supply output cable to the throttle's input jack
2) Connect track to the throttle's output 5 way binding posts.
(Piko quick connect power track clips show below are optional) The binding posts work with up to 12AWG size cable. Choose cable size depending on your cable length;: use 18AWG cable for up to 10 feet, use 16 AWG for 10 to 30 feet and 14AWG cable up to 100 feet and over 100 feet use 12AWG cable (all available at our store) The larger the cable the power the power loss.
3) Connect AC Power: The SL Digital Throttle comes preset for running G Scale Trains using memory setting #1. See instructions or tutorial for setting up other memory locations for different Gauge Trains or your choice of maximum voltage, current or wattage allowed.
4) Push M1 button in the upper left corner for 2 seconds to load G scale train settings, push the blue button on the speed adjustment arm to select 1/10 volt momentum, push the Power ON/OFF button to connect the output power, select the Forward or Reverse switch and turn silver speed knob to adjust your loco speed.
(track, loco and PIKO power track wires are not included in the set)
5) Rotate the speed knob clockwise for faster speeds, counter clockwise for slower speeds and push the yellow ON/OFF button at any time to turn track power ON and OFF. After 30 seconds of no change in speed the throttle will enter display mode.
To exit display mode, push the V button and the blue button at the center of the rotary control to cycle through your choice of 1V, 1/10V and 1/100V steps, and adjust the output voltage as desired. Do the same to change the amperage by pushing theA/↓. (To recall memory setting #1 for G Scale trains just push and hold the the top left V/↑ button for 2 seconds.)
Run any Gauge Analog Layout! (loco, track and track power clips not included)
Limited quantity available - Order now while stock is available - Direct from Manufacturer - By ShourtLine.com
For questions email info@ShourtLine.com or call 310-622-4431
Thanks for looking - Shourt Line by Soft Works Ltd.
copyright 2018 ShourtLine.com - Soft Works Ltd. all rights reserved