G Scale LGB 24020 Peanuts® Snoopy® Flyer Air Loco NEW Made in Germany
NEW - no longer available - Collectable
From an Authorized LGB Dealer
( track not included but available at our store)
Shourt Line Direct Discount Price: $499.95 NEW
The Model
Features:
This type of special car is powered by a propeller on the rear of the car. This rare and collectable air car features the Peanuts® character Snoopy® as pilot. The speed and direction of the car is controlled by track voltage up to 24 volts DC. It is fun and easy to operate but be cartful as the car can reach G Scale speeds of over ~300 MPH!
- Weather-resistant car construction
- Included Snoopy® Figure is not weather resistant
- Ball Bearing Metal Wheels for easy rolling and power pickup
- Power Pickup on all 4 wheels
- 7 pole Bühler motor
- Propeller Air Power
- Collection item
- Length 230mm (9.1")
- Weight 660g (1.5 lb.)
- Original Instruction manual included Click here to view user manual
OPERATION:
Propeller-driven railcars are fun because of their unique operating characteristics. For example: - When you turn the speed control, the railcar will not move immediately. It takes time for the thrust of the propeller to build.
- Once the railcar starts to move, it will accelerate quickly. The thrust needed to overcome inertia is much greater than he thrust needed to maintain a constant speed.
- When you return the speed control to stop ("0"), the railcar will keep moving. To stop the railcar, create reverse thrust by reversing the speed control. Attention! Excessive speed in curves may cause derailments. Remove any object that could be damaged from any potential derailment area.
Attention! This model does not have bumpers or couplers. It can be damaged by towing or hitting other LGB trains.
Multi-Train System
This model is not designed for installation of a Multi-Train System decoder.
To use this model on a Multi-Train System layout, contact ShourtLine.com your authorized LGB Dealer & Service Center.
Use this model with power supplies with an output of at least 1 amp. After extended operation, this model may leave carbon dust or other debris around the track. This dust and debris can stain carpet and other materials. Consider this when setting up your layout.
For quality service, contact ShourtLine.com, your authorized retailer.
Do-It-Yourself Service:
- The axle bearings should be lubricated occasionally with a small amount of LGB Maintenance Oil (50019)
- Cleaning
This model can be cleaned externally using a dry brush. Do not use liquid cleaning agents.
- Replacing the wheel sets
- - Unplug the power pick-ups from the wheel sets.
- - Use a rod, like a nail, to push the axles from one side out of the wheel mounts.
- - Tilt the axles so the ends are below the wheel mounts.
- - Push the axles to the other side.
- - Remove the wheel sets.
- - Install new wheel sets the same way.
- Maintenance parts (available at our store)
- 50010 Smoke and Cleaning Fluid
- 50019 Maintenance Oil
- 67403 Ball Bearing Wheel sets, 2 pieces
Options: (not included with loco)
Recommend optional items
- G Scale Track by LGB or PIKO
- LGB Snoopy Starter Set - available at our store
- Shourt Line Power supplied and Throttle
- ESU LokPilot decoder with installation available at the ShourtLine.com
Optional items above available at our store
Photos:
Includes Snoopy® figure, Flyer, Original documents and original packing
Snoopy® the Great Flying ACE is piloting (track not included but available at our store)
Note: this item is NEW in the box. Photos are from actual item.
(track not included but available at our store)
(track not included but available at our store)
(track not included but available at our store)
Note that the car has metal ball bearing power pickup wheels and all wheels pickup track power. (track not included but available at our store)
Don't miss this NEW rare collectable LGB 24020 Peanuts® Snoopy® Flyer before it leaves the rails! ( track not included but available at our store)
Questions? call 310-622-4431
Thanks for looking - Shourt Line by Soft Works Ltd
copyright 2017 Shourt Line - Soft Works Ltd. all rights reserved |