Shourt Line by Soft Works Ltd.
Model Railroad Products

Home and New Products


About Us










Contact Us &
How to Order

SL-LED-12-kit - G Scale Lighting for Passenger Cars by ShourtLine - now includes a FREE buck LED regulator for 97% efficiency lighting with DC, Analog, DCC or Battery Power!

Fully light your LGB classic passenger coaches with only 25 ma (.025 amps) of DCC track power.

Easy to install kit can be added to your car without any drilling holes or modifying your car.

Enhance and preserve your cars value by adding the SL-LED12-kit.

Dim the lighting on you cars by adding our our optional SL-Dimmer-bd dimmer board that provides 0 to 100% brightness by rotating the rear dimmer that attaches to roof vent or bottom of car mounted dimmer.

SL-LED-12-kit for Passenger Cars

Shourt Line Direct Discount Price: $93.25 New

For questions on this item or details on our professional layout design and installation services Call 310-622-4431 or email us at

Included items:

  • SL-LED-12-kit:
    • Complete photo based instructions for an easy install
    • 12 super bright 5mm warm white LEDs - color balanced to LGB bulbs (2700 Degrees Kelvin)
    • 12 LED holders for mounting and prototypical look
    • 6 lighting boards for mounting LEDs with holders and serve as a light reflector for efficient lighting
    • Screws and attachment pads for lighting boards.
    • FREE SL LED Controller for converting AC, DC, DCC or MTS power into regulated LED dimming and control.
    • Wiring for power in and out of your coach for use with your choice of connectors below or for direct connection to power pickup from the cars wheels.
  • PLUS Your choice of either the round (SL-LGB-RPC)or square (SL-LGB-SPC) power connector sets:
    • SL-LGB-RPC:
      • LGB round mini-banana power connectors (original LGB power connectors for use between loco and cars and car to car lighting) includes 2 plugs(male), 2 sockets(female) red & black for each type. These can be used with the SL-LED-12-kit to connect to the power jack of your LGB or other mfg. loco and pass the power to following cars using the two socket connectors (female).
      • This is perfect for LGB locos manufactured before 2000 that used the round style connectors.
      • An adapter is available at the Shourt Line for adapting the round to square style connectors so the round style can be used with the newer square LGB power connectors.
    • SL-LGB-SPC:
      • LGB square 2 pin power connector kit: 1 socket (Female) with 8" wire for connecting to your newer LGB loco using the square power connector style and , 1 plug (Male) for passing power to following cars.
      • This is perfect for LGB locos manufactured after 1995 that used the square style power connectors.
      • An adapter is available at the Shourt Line for adapting the round to square style connectors so the square style connectors can be used with the older locos using round LGB power connectors.

Required tools:

  • Wire Stripper or x-acto knife
  • Philips screw driver
  • Soldering Iron/solder and/or wire wrap tool (available at the Shourt Line)

Skill Level:

  • Beginner - safe operation of a drill and soldering iron experience required.


  • Kit Manufactured in the USA by the Shourt Line
  • Input: 4.5 to 24 volts AC, DC, DCC, MTS or battery power
  • input voltage: 25ma at 22 volts (.025 amps = 1/3 the power of an LGB 24V bulb at 20X brightness)


  • FREE SL LED controller for dimming and LED regulation at any voltage input from 4.5 to 25 volts AC, DC or DCC.
  • Each of the 6 compartments, including the toilet, are lighted from one of 6 lighting boards
  • Large white reflectors on each lighting board distribute the light evenly in each compartment
  • The Pat Pend. design hides the wiring and creates a prototypical car interior
  • Designed for MTS or DCC operation
  • Made in the USA

Optional items for use with the SL-LED-12-kit: (not included with the kit but available at the Shourt Line store

Professional Installation by the Shourt Line: Just send us your car or the roof only if powering direct from your loco.

SL-Dimmer-bd This low profile dimmer board fits between the roof of the car and the LED panel in the SL-LED-12-kit. This allows 0 to 100% brightness by rotating the rear vent on your car. The dimmer can also be installed in the on the bottom of your cars in the spaces provided by LGB and the dimmer control can be mounted in the vertical cylinder on the bottom of the LGB car so all items are totally hidden and sealed from the weather. Instructions show the mounting options.

SL-LGB-R2SPC LGB round mini-banana to square type connector adapter for use with round style lighting connectors that need to plug into newer locos that require the square power connector.

SL-LGB-S2RPC LGB square to round mini-banana adapter for use with square style lighting connectors that need to plug into an older loco using round mini-banana power jacks.


SL-LED-12-kit for Passenger Cars
The SL-LED12-kit uses only 1/3 the power of a single LGB 24 volt bulb but has 20X the lighting power with 22 volt input!

SL-LED-12-kit for Passenger Cars
Dimming is continuous is adjustable using the free LED controller included.

SL-LED-12-kit for Passenger Cars

SL-LED-12-kit for Passenger Cars
Don't leave your passengers in the dark, use the SL-LED-12-kit to light up your cars both day and night. All aboard!

Made in the USA - 100% satisfaction guaranteed.

Questions? call 310-622-4431 or eMail or by clicking here

Thanks for looking - Shourt Line by Soft Works Ltd

copyright 2017 Shourt Line - Soft Works Ltd. all rights reserved